How to dye natural fur. We give a fur product a second life - learn how to dye fur at home

Alas, over time, the fur on our favorite fur coats loses its original appearance, changing in color and shape. But you don't have to run out for a new product. The first reason is that it is far from cheap, and the second is that we will tell you how to dye fur at home. Of course, it should be rightly noted that not everyone decides to paint at home. Most are simply afraid of ruining the fur and prefer to entrust the product to professionals. This, of course, has its own meaning. But with our recommendations, you will not only not spoil the product, but also breathe new life into it. The fur will regain its shape, the fibers will become soft, and most importantly, the color of the product will be like new again. It needs to be cleaned before painting. Without this procedure, painting may result in unpainted areas, which will only worsen the situation.

Cleaning the fur

For cleaning we need:

water – 1 l;
salt – 20 g;
ammonia - (25%) -3 g;
detergent – 1 g;
soda – 2 g.

Mix and soak the product in the resulting solution for at least an hour. Next, squeeze and rinse well under running water. It must be completely dry before painting.

How to dye natural fur at home

For painting we will need:

paint for fur: in relation to the original color, you need to choose a darker shade;
fatty cream (glycerin will also work);
vinegar.

Fur dyeing at home

After we have cleaned the pile with the solution, we need to stretch it on the board and secure it. This will prevent the fur from shrinking.
In order to avoid drying out of the product, its reverse side must be coated with fatty cream or glycerin.
We wet the pile a little and paint it.
Mix warm water and vinegar.
We place the fur coat after dyeing.
The product should be dried without using a hair dryer.

As we can see, dyeing fur at home is not very difficult. You just need to follow the rules: before painting, be sure to clean the product with a solution, check in a small area how the pile reacts to the paint and coat the core with glycerin.

How to dye arctic fox fur at home

Painting the Arctic fox is carried out according to the same principles. It is necessary to clean it with a solution. If there are stains on the product, they can be removed with a solution of one teaspoon of ammonia and three tablespoons of salt dissolved in one liter of water.

Must be painted on damp pile. After the paint has settled, wash it off in the shower. This type of fur can be dried with a hairdryer.

How to dye fur at home with hair dye

It would seem that there is another way to dye fur at home. It turns out that regular hair dye is great for this. The advantages of this method are that it produces rich color and ease of painting. The downside is that such a rich color does not last that long, about six months.

In order to radically change the color, the fur coat should be lightened using an oxidizing agent.
Paint evenly with a special brush.

If you like experiments, try dyeing your fur coat in tonic. It will give a temporary shade, and you will definitely understand your preferences.

We figured out what and how to dye fur at home. After painting, special care is required. You can apply hair balm dissolved in water and rinse it off the product. The fur will get a special color and the product will last much longer. We wish you good luck!

The portal contains addresses and telephone numbers of Moscow studios where you can order fur dyeing. Prices for the service are presented in tables convenient for comparison. Thus, you can compare the cost of services in different studios and find the best option. The portal contains reviews from visitors who have already contacted the studio or salon. This will help you find really decent seamstresses and tailors.

Which studio in Moscow is best for fur dyeing?

Fur dyeing helps restore the former beauty of hats, fur coats and fur capes, eliminates yellowing and fading, and renews the appearance of the product. If the fur on an old fur coat is well-made, but the color has already become ugly, it is better to turn to a good craftsman and carry out restoration, rather than throw it away or put it in a distant closet. Where can you dye fur with high quality, and how much will it cost?

Prices for painting fur and deadlines for completing the work

In the studio, a fur product is dyed in different ways, the most expensive is a gradient, and the cheapest is tinting. In the first case, two-color painting is used; not every master can make a beautiful transition between colors. For complex work, you should not skimp on a specialist. A simple option is tinting, which simply gives the fur a more saturated shade and restores its shine. Such restoration can be ordered at any specialized studio for working with fur products.

Average prices are:

Toning: from 1700 rub. for hats, from 1500 rub. for collars and cuffs, from 3500 rub. for vests and capes, from 5000 rub. for fur coats
Coloring is calculated individually, but if there is no color change, then prices are approximately 100-200 rubles. more expensive than tinting.

Dyeing natural or faux fur takes a little time, on average 1-2 hours, it depends on the skills of the artist and the area of the product. It is faster to dye a small hat than a large, voluminous fur coat.

Unfortunately, in many studios in Moscow there are queues of clients, especially for competent furriers, so it is better to make an appointment in advance. In the table you can find the company closest to you, its opening hours and contact phone number.

What is important for the customer to know?

There are a number of cases when companies refuse to paint a client, and this is due to compliance with technological standards. The restoration goes like this:

The lining is ripped out and the condition of the fur is checked. If the reaction is normal when moistened, then the item will be taken to work; if the subcutaneous part of the skin begins to peel off and deform, then the master will refuse. Most often, they do not take into work products that are more than 15 years old.
It happens that after painting there is shrinkage, and you need to recut it according to your figure. The specialist should warn about such things, since for the client this is from 2 to 10 thousand additional expenses.

Dear Clients

Prepayment for sewing products is not less than 50% of the cost of work.

The Lynx factory also offers additional services, such as painting, cutting and hauling.

Dye fur is produced in different colors. We dye both individual skins and finished fur products (we don’t paint sheepskin coats) .

When painting finished fur products, be careful. Paint happens without fabric lining, only skins are dyed. Before painting, you are checked to see if it can be painted.

If you wish, you can check it yourself : Take your fur item that you want to dye, lightly peel off the lining and wet the skin well. After this, forcefully pull the soaked leather in different directions; if the leather is torn, it means that poor-quality workmanship was used in the sewing and when painting, your product may fall apart - paint it IT IS FORBIDDEN, if the skin easily stretches to the sides - paint CAN .

We warn you in advance that when sewing a fur product, many companies often stretch the skin to make it larger, such things after painting I can shrink up to 30% .

Painting of fur products

Name (painted black, brown, graphite)	Price in Malakhovka
*Skins:*
Beaver (not shorn)	95 rub. dm 2
Beaver (shorn)	65 rub. dm 2
Long fur (fox, arctic fox, etc.)	580 rub. dm 2
Short fur (marten, mink, sable, polecat, etc.)	525 rub. dm 2
Plates (astrakhan fur, mink)	65 rub. dm 2
*Products:*
Vest	7,000 rub.
Jacket (length up to 65 cm.)	8,000 rub.
Short fur coat (length up to 90 cm.) without hood, excluding restoration	12,000 rub.
Short fur coat (length up to 105 cm.) without hood, excluding restoration	16,000 rub.
*Flare* (for vests, jackets and short fur coats)	+ from 10 - 30% to the price for dyeing depending on the length of the product
Straight fur coat (length from 110 cm.) without hood, excluding restoration	18,000 rub.
Flared fur coat (length from 110cm.) excluding restoration	23,500 rub.
Hood, excluding restoration	3,000 rub.
Collars, cuffs, trims (long fur) excluding restoration	95 rub. dm 2
Collars, cuffs, trims (short fur) excluding restoration	65 rub. dm 2
Hats, excluding restoration	1,300 rub.

SHEEPSKIN COATS, SHEEPSKIN (NOT SHEARED) AND LEATHER - WE DO NOT DYE!

Painting time 2 weeks
Shrinkage of a fur product during painting 30% (1 size)
Shrinkage during dyeing always occurs and the product shrinks unevenly

It is necessary to restore (restore) the product after dyeing Necessarily!

Restoration of products after dyeing

Size	In Malakhovka
Vest	10,000 rub.
Jacket (length up to 65 cm)	from 15,000 to 18,000 rub.
Short fur coat (length up to 90 cm)	from 18,000 to 20,000 rub.
Short fur coat (up to 105 cm)	from 20,000 to 23,000 rub.
Long fur coat (from 110 cm)	25,000 rub.
Cover with new lining	25,000 rub.
Flare (depending on the length of the product)	from 10 - 30%
Hood	2,000 rub.

Prices do not include the cost of the stock (up to size 50)

A little history about dyeing coats, fur and skins

Animal fur has been necessary for humanity throughout the history of its existence. And today, fur remains a valuable and commercially viable product, because it is used not only for warmth, but also for decoration and, undoubtedly, is a luxury item.

The skins of fur-bearing animals consist of a dense undercoat and longer, stiffer hairs that rise above this layer. The main function of the undercoat is to maintain the animal's body temperature, and the longer guard hair is to protect the skin during rain or snow. Fur pelts are mainly sold at auction. Most of them are bought by production companies specializing in sewing products using fur or by brokers. The largest auction centers are located in New York, Montreal and St. Petersburg.

In the modern fur industry, fur is used for sewing or decorating outerwear. Often, in order for the finishing color to go well with the color of the main material of the product, it is used fur dyeing in different tones. High quality dressing and dyeing fur is very important, because this will determine how long the product made from it will last. Many people are interested in the question: is it possible dye the fur so that it does not lose its quality? Certainly! Moreover, if painting skins was produced in compliance with the necessary technology, the fur can last longer. That's how dye natural fur Only professionals know how to ensure that the skins remain soft and elastic. Sometimes the fur, on the contrary, is bleached or this method is used dyeing natural fur, in which only longer hairs are shaded. This is exactly what happens in some cases silver fox fur dyeing. Same method can you dye arctic fox fur and give the product a very original look. When sewing a mink coat or coat, it is also advisable dyeing fur or mink coat in one color, if there are skins that are identical in softness, length of pile and density of the undercoat, but initially different in color.

Selecting skins for a product is not an easy task and requires a lot of furrier experience. The advantage of fur material is that, if necessary, you can replace pieces with defects with others that are ideal for the main raw material. In such cases it may also be necessary dye mink fur, arctic fox or other fur-bearing animal to match the color of the skins that were selected for the product. It is possible to give a fresh look to a coat or fur coat that has been worn for several years if dye old fur into a different, more saturated shade. A competent selection of fur makes the fur coat look like it was sewn from one large skin, without focusing on the joining of different fragments.

Information about where can you dye fur, now it won’t be difficult to find. It is important to turn to professionals, because such material is quite expensive and requires a special approach. Usually these are special workshops or fur dyeing studio. Such organizations have special equipment and, most importantly, extensive experience in working with different types of fur, so you should have no doubts where to dye real fur .

Fur skins can be dyed in different ways. The main ones are namazny, okunochny or combined. In each individual case, the most optimal of them is used.

Where to dye fur in Moscow can be found out from various sources. It should be taken into account that this procedure is quite expensive and only a high-quality service can guarantee a good result and not disappoint. Therefore, trust only verified sources , in such a non-standard type of service as fur dyeing in Moscow . Fur dyeing price will depend on several factors: the painting method and the chemicals used (size, length, style) if it is a product.

Examples of fur and skin dyeing work

Often a favorite fur coat or vest loses its appearance, although other characteristics are still quite excellent. The fibers fade, become dull and give the product a very worn look. If you want to enjoy the warmth and comfort of your favorite thing, then you can shade it a little. But not everyone knows how to dye arctic fox fur at home.

You don’t have to bother with painting it yourself, but rather take the product to a special workshop, where everything will be done quickly and professionally. But the cost of such a service is often prohibitively high. It will be much cheaper to learn how to dye natural fur at home and do this work yourself.

Important: Please note that if the product is still new, it is strictly not recommended to dye it simply to change the color, since any dyeing of fur shortens its service life.

Each type of fur is beautiful and original in its own way. The painting of each of them also has its own characteristics:

White rabbit, chinchilla or mink fur is the easiest and simplest to dye, because it does not require pre-lightening. You can use any color that can cover the yellowness that appears.

Tip: Keep in mind that rabbit fur is very sensitive to chemicals, so it must be dyed with extreme caution.

Preparation

In order for you to get a very good effect, the fur product must be prepared for painting. Then the paint will apply much more evenly and there will be no bald spots. The most important thing is to thoroughly clean your fur coat or vest. To do this, you need to prepare a mixture of the following substances:

2 tbsp. l. salt;
1 tbsp. l. ammonia;
2 tbsp. l. soda;
1 tbsp. l. washing powder;
2 liters of warm (not hot) water.

All components must be mixed and the resulting mixture carefully applied to the fur. Lightly brush the bristles so that not only the top, but also the bottom part is cleaned. Then moisten a clean cloth with water and wipe the fur from the composition.

After such cleaning, the fur must be dried naturally, without using heaters or a hair dryer. It is also not recommended to leave the product exposed to direct sunlight.

How to paint?

How can you dye fur? This is a completely natural question that arises among many people who are puzzled by the question of how to dye mink, rabbit or arctic fox fur at home. Of course, there are several very realistic home dyeing technologies.

Professional product

You can use special paint for fur, which is sold in hardware stores. It lies very naturally on the fibers, as it is designed taking into account the characteristics of animal fur.

Hair dye

A more affordable option is hair dye. This is also the most popular coloring method, because you can choose any color from a huge palette.

Important: Keep in mind that fur should always be dyed in a darker shade. Over time, the fiery red color will turn to “rusty” or red, and the black color will fade to a dirty brown.

So, how to dye fur at home using hair dye:

mix all paint components according to instructions.
put on gloves.
treat the inner skin (skin) with baby cream, glycerin or petroleum jelly to prevent it from drying out;
wet the fur so that the paint is distributed more evenly;
apply paint with a brush to the entire fur surface;
remember the fur a little with your hands;
wait 35-45 minutes;
wash off the paint with water;
lay the item on a horizontal plane, squeeze out excess moisture with your hands, and leave to dry;
After drying, comb the fur.

You can not dye the entire fur, but only the tips of the fibers. Typically, they are lightened to give the product a richer appearance.

Suede paint

You can treat the faded tips of the fibers with suede paint, which is sold in aerosol cans. To do this, place the spray can at a distance of at least 0.5 meters from the item and evenly paint the entire surface. Leave the fur to dry for a while and then rinse it thoroughly. After this, prepare a fixing solution: 5 tbsp. l. vinegar per 2 liters of water. Wipe the pile with this liquid and leave it to dry.

If a fur item is already dark, but you would like to dye it a bright and rich shade, then you can bleach the fur. Hydrogen peroxide tablets or hair lightener will help with this.

Peroxide is diluted with water in a ratio of 1:3. If you use clarifier, dilute it as written in the instructions. Different manufacturers may make different concentrations of clarifiers. Apply the prepared mixture to the fur and leave for 10-15 minutes. You cannot keep the composition on the pile longer, as the hairs can become brittle. After treatment, rinse the fur with water and dry naturally. It can be painted only after it has completely dried.

When deciding to lighten and dye fur, carefully select the color, because it will be undesirable to carry out these procedures again. Not a single piece of fur, even the highest quality, can withstand repeated dyeing.

When dyeing fur, it is important to know some nuances:

The fur you decide to dye should not be too shabby.
Only clean fur will dye well, so it must be cleaned first.
The yellowed white fur of the Arctic fox can be simply lightened.
Before using any dye, be sure to test it on an inconspicuous area of fur.
When painting, you can hide some flaws and defects.
Instead of full-fledged paints, sometimes you can use small folk tricks. For example: the fur of a red or steppe fox can be quickly and painlessly renewed using a strong solution of potassium permanganate. In this case, use a small sponge. It needs to be dipped into the solution and passed over the villi, being careful not to touch the core.
After dyeing and drying, the fur must be combed so that it becomes fluffy again.
Using tinting shampoo, you can create a unique decor on your fur product. You just need to show a little imagination.

Now you know whether it is possible to dye the fur of the Arctic fox and other fur-bearing animals, and you can also imagine the technology of this process. The main thing is to strictly follow all instructions. And your favorite and cozy fur coat will delight you with its warmth and impeccable appearance for some time to come. If you do not dare to take such an important step as dyeing fur, then contact specialists at a dry cleaner or workshop for repairing fur products.

It is known that fur products look beautiful and luxurious and provide good warmth in the winter cold. Like any clothing, they lose their great appearance over time. If your favorite thing has faded or is simply boring, you can paint it at home without turning to specialists, thereby turning it into something new and unique.

How to dye arctic fox fur at home

Arctic fox fur lends itself well to dyeing. If you want to upgrade your Arctic fox item, you will need:

hair dye;
fatty cream (can be replaced with glycerin);
hair balm;
rubber medical gloves;
a brush or an old toothbrush for applying the coloring composition;
vinegar.

Your actions:

Lubricate the inside with cream.
Stretch the material on a flat surface and secure it.
Thoroughly moisten the previously cleaned surface with water.
Wear gloves and quickly apply the coloring compound, smoothing the pile with your hand.
Wait for the period of time specified in the dye instructions.
Rinse the lint under running warm water and rinse in a vinegar solution.
Treat the item with balm diluted in water and rinse.
Lubricate the inside again with cream, carefully stretch it, pin it with pins, and let it dry.

Dyeing a mink coat

The mink coat looks great and is durable. If the color of the product has faded, you can dye the mink fur. Before you dye mink fur at home, prepare:

hair dye;
spray;
a comb with fine teeth;
shampoo;
hair balm;
fatty cream (glycerin is possible).

Your actions:

Clean the item from grease and dirt.
Treat the flesh with cream.
Prepare the coloring composition according to the instructions.
Lightly moisten the surface with water using a spray bottle.
Apply the dye to the pile with a spray bottle from a distance of 50 cm.
Even out the tone by combing the surface with a comb.
Wait half an hour.
Rinse off the coloring composition with warm water and shampoo.
Rinse with balm diluted in water.
Apply the cream to the flesh.
Lay out the product and leave it to dry.
Comb the fibers in the desired direction.

Fur cleaning

Before you dye your fur at home, you need to clean it. Paint particles have difficulty penetrating greasy, contaminated pile. Before dyeing a fur coat or other fur item, you should clean the product with an alkaline solution. To do this you will need:

water – 1 l;
salt – 2 tsp;
ammonia – 1 tsp;
detergent (dishwashing gel, washing powder) – 1 tsp;
baking soda – 2 tsp.

Your actions:

Dissolve the ingredients in water, stir well until smooth.
Treat the flesh with a rich cream (possibly glycerin) to prevent drying out.
Apply the resulting solution evenly to the pile using a brush.
Rinse thoroughly under running water.
Lay the item out and let it dry at room temperature.

Coloring fur with hair dye

The structure of natural fur pile resembles human hair. Therefore, hair dye is suitable for home dyeing. This drug can be purchased at any supermarket or household chemical store. The choice of colors and shades is varied, and it will not be difficult for you to find the right tone. It is better to choose shades darker than the original color, for example, black. To give something a light shade, you need to bleach it by treating it with a solution of hydrogen peroxide. Dyeing fur with this product is simple and reminiscent of the procedure for coloring your own curls.

Spray for coloring fur

Another product intended for dyeing at home is a special spray. This product is used to add tint to long ends. The undercoat and undercoat are not affected. The dye dissipates at a distance of 60-70 cm. The can should be moved slowly and measuredly to distribute the substance evenly. The painted area should be combed immediately to remove excess product and prevent the fibers from sticking together.