Mod en blood in Skyrim.

Description:
Pack of textures replacing standard blood. The textures significantly improve the appearance of the blood; the author increased the resolution from 512 to 2048. This is not just a mod, but a completely new blood and its behavior! Traces of blood on clothes, on the ground, on the grass. Blood splashes from blows on long distance, at the same time, not only you, but also your enemies get dirty. The new kind blood displayed on the screen and much more. Added optional settings and patches.

Update:3.6b
- Fixed effects for unarmed strikes for spiders and Dwemer robots
- Fixed the effects of crossbow bolts, the wrong type of wound was used for damage
- Fixed incorrect bleeding for certain types of monsters from the Immersive Creatures mod
- Reworked normal maps ( normal maps) pools of blood on hard surfaces
- Normal maps of leaking engine oil from mechanisms have been redone again
- Updated patches for Skyrim Monster Mod version 13 (these patches should not be used with older versions of Skyrim Monster Mod, otherwise it will cause the game to crash on startup)
- The following patches have been removed:
1. Dragonborn-EBT Patch.esp (patch for DLC Dragonborn) and Dawnguard-EBT Patch.esp (patch for DLC Dawnguard), now there is only one common patch for both DLC Dragonborn and Dawnguard, you must have both DLC installed
3. Dawnguard-Immersive Creatures EBT Patch.esp (patch for the "Immersive Creatures" mod with the Dawnguard DLC installed)
4. DG-MM-SiC EBT Patch.esp (patch for the "Monster Mod" and "Immersive Creatures" mod with the Dawnguard DLC installed)
5. Dragonborn-MonsterMod EBT Patch.esp (patch for the "Monster Mod" mod with the Dragonborn DLC installed)
6. Dawnguard-MonsterMod EBT Patch.esp (patch for the "Monster Mod" mod with the Dawnguard DLC installed)
- Updated blood textures in all variants in module 4 texture res and color

1 core files- this is the main module, it is necessary to install

2 patches- this is a module with patches for DLC Dawnguard, Dragonborn and for the Monster Mod and Immersive Creatures mods (there are 5 folders with patches inside the module)
- IMPORTANT!!! Install only one of all the options!!!
- DG DB - patch for DLC Dragonborn + Dawnguard (install if both DLCs are installed)
- IC DG DB - patch for the "Immersive Creatures" mod with Dawnguard and Dragonborn DLC installed (install if both DLC + "Immersive Creatures" are installed)
- IC MM DB DG - patch for the mod "Monster Mod v13" and "Immersive Creatures" with DLC Dawnguard and Dragonborn installed (install if both DLC + "Monster Mod v13" and "Immersive Creatures" are installed)
- MM - patch for the mod "Monster Mod v13" (install if you have a game without DLC Dawnguard and Dragonborn)
- MM DG DB - patch for the mod "Monster Mod v13" with DLC Dawnguard + Dragonborn installed (install if both DLC Dawnguard and Dragonborn + "Monster Mod" are installed)

3 optional esps- this is a module with optional esp. files (there are 3 options inside the module)
- IMPORTANT!!! The largerblood or smallerblood options can only be placed on 1 of the 2 options, and the smallerwound option can be placed separately
- largerblood - select this option if you want there to be more blood splashes on the ground (much more than in the original game)
- smallerblood - select this option if you want there to be less blood splashes on the ground (about the same as in the original game)
- smallerwound - select this option if you want there to be fewer bloody wounds on the body (about the same as in the original game)

4 texture res and color- this is a module with blood texture sizes and blood color (there are 9 folders inside the module)

5 blurry screen blood- this is the "blur" module
- textures - if you want the blood and blood stains on the screen to be blurry/blurry, then install these textures

6 alt text- this is a module of alternative sizes of textures and blood colors (there are 9 folders inside the module), these options replace only large blood splatters, make sure that the selected module matches the options that you chose when installing module 4 texture res and color, that is first, for example, from module 4 texture res and color you selected the hi-brigther option, which means then you need to install the same hi-brigther option from this module, replacing all files, keep in mind that this is an optional installation, optional
- IMPORTANT!!! Install only 1 of all options!!!
- hi-brigther - high blood textures, blood color is brighter/lighter
- hi-darker - high blood textures, the color of the blood is darker (darker than regular game blood)
- hi-default - high blood textures, normal game blood color
- med-brighter - medium blood textures, blood color is brighter/lighter
- med-darker - average blood textures, the color of the blood is darker (darker than regular game blood)
- med-default - average blood textures, normal game blood color
- low-brighter - low blood textures, the color of the blood is brighter/lighter
- low-darker - low blood textures, the color of the blood is darker (darker than regular game blood)
- low-default - low blood textures, normal game blood color

Problem:
- The mod remains in the MSM list, but all menu items are gray (unavailable)

Solution:
- Still, you need a second clean save, made with the missing scripts folder. Stopping scripts from the MSM menu alone is not always enough. Those. It’s safer not to overwrite files, but first disable the mod in the MSM menu, save in the game in a clean save slot, exit the game and delete the mod completely, enter the game again and save again, but in another new save slot, and only then install new version

Question:
- During the battle from the first person, and in the subsequent transition to the 3rd person, the character’s blood disappears

Answer:
- Take off all your clothes and put them back on

Conflicts:
Conflicts with other blood replacers and damage modification mods

Requirements:
- Game version 1.9.32.0.8 for mod version 3.6b
- SKSE 1.06.16 or 1.07.01 and higher for game version 1.9.32.0.8
- and higher for game version 1.9.32.0.8

Installation:(It’s better through, but you can do it manually)
The archive contains 6 modules, each module contains different variants, DESCRIPTION of the contents of the archive read above
- If you do it manually, do it like this...
1. First of all, go to the 1 core files folder - take all the contents (meshes, Scripts, textures, dD - Enhanced Blood Main.bsa, dD - Enhanced Blood Main.esp) and place everything in the Data folder in the game, confirm merging the folders and files and activate in the launcher
2. Next...go to the 2 patches folder and select the patch that suits you, select only 1 of all 5 patches in accordance with what you have in the game, place the esp. to the Data folder in the game and activate it in the launcher
3. Next...(this is optional), go to the folder 3 optional esp. and select the option that suits you, read the description in this section what these options mean, select the one you need and place the esp. to the Data folder in the game and activate it in the launcher
4. Next... go to folder 4 texture res and color (read the description above), there are 9 options inside, select 1 of 9 options that you need and place textures in the Data folder in the game, confirm merging folders and files
5. Next...(this is optional), go to folder 5 blurry screen blood (read the description above), take the textures folder and place it in the Data folder in the game, confirm the merger of folders and files
6. Next...(this is optional), go to folder 6 alt tex (read the description above), you need to select 1 of 9 options that you need and place textures in the Data folder in the game, confirm merging folders and files

A pack of textures that replace standard blood in the game Skyrim LE. The textures significantly improve the appearance of the blood; the author increased the resolution from 512 to 2048. This is not just a mod, but a completely new blood and its behavior! Traces of blood on clothes, on the ground, on the grass. Sprays of blood from blows over a long distance, and not only you, but also your enemies get dirty. A new type of blood displayed on the screen and much more.

Update:3.8
- Added sounds of blood splashes and drops.
- Added patches for the "skyBird" mod to prevent script binding, in the module 3 optional esps - distance there are three different .esps

Update:3.7
- Reduced the script check condition when an actor takes damage.
- Now, when health is low, drops of blood appear when attacking without a weapon from blows.
- Increased the default script cloak application time to 10 seconds, instead of 2.
- The main script for NPCs has been cleaned and improved.
- A fix has been made from the Modern Brawl Bug Fix mod to fix attacks on your GG from other NPCs for no reason.
- Changed blood spatter decals to earlier ones, they were better.
- Added optional files to change the distance at which bleeding will appear (in the optional esps module). Medium option - half the default range length and short option in melee combat. This can help with performance without creating new blood decals if you're in close range. Bleeding when shooting with a bow will not appear outside the specified range.
- Minor changes have been made when updating and deleting the mod.

What's in the archive:
1 core files - this is the main module, it is necessary to install
2 patches is a module with patches for the DLC Dawnguard, Dragonborn and for the Monster Mod and Immersive Creatures mods (there are 8 folders with patches inside the module)
- IMPORTANT!!! Install only one of all 8 options!!!
- DG DB - patch for DLC Dragonborn + Dawnguard (install if both DLCs are installed)
- IC DG DB - patch for the "Immersive Creatures" mod with Dawnguard and Dragonborn DLC installed (install if both DLC + "Immersive Creatures" are installed)
- IC MM DB DG - patch for the "Monster Mod" and "Immersive Creatures" mod with Dawnguard and Dragonborn DLC installed (install if both DLC + "Monster Mod" and "Immersive Creatures" are installed)
- IC MMv4 DB DG - patch for the mod "Monster Mod v4" and "Immersive Creatures" with installed DLC Dawnguard and Dragonborn (install if both DLC + "Monster Mod" and "Immersive Creatures" are installed)
- MM - patch for the "Monster Mod" mod (install if you have a game without DLC Dawnguard and Dragonborn)
- MM DG DB - patch for the "Monster Mod" mod with the Dawnguard + Dragonborn DLC installed (install if both Dawnguard and Dragonborn + "Monster Mod v4" DLCs are installed)
- MMv4 - patch for the mod "Monster Mod v4" (install if you have a game without DLC Dawnguard and Dragonborn)
- MMv4 DG DB - patch for the mod "Monster Mod v4" with DLC Dawnguard + Dragonborn installed (install if both DLC Dawnguard and Dragonborn + "Monster Mod v4" are installed)

3 optional esps (optional) - this is a module with optional esp. files (there are 3 options inside the module)
- IMPORTANT!!! The largerblood or smallerblood options can only be placed on 1 of the 2 options, and the smallerwound option can be placed separately
- largerblood - select this option if you want there to be more blood splashes on the ground (much more than in the original game)
- smallerblood - select this option if you want there to be less blood splashes on the ground (about the same as in the original game)
- smallerwound - select this option if you want there to be fewer bloody wounds on the body (about the same as in the original game)
- distance - option, the distance at which bleeding will appear on NPCs, 2 options dD-Medium Script Range.esp (bleeding will appear on NPCs at medium distance) and dD-Short Script Range.esp (bleeding will appear on NPCs only at short distance). This can help with performance without creating new blood decals in the distance if you're in close range. By default, in the main mod, blood is visible at long distances. There are also 3 patches for the skyBirds mod
EBT - skyBirds Patch.esp - Install this patch if you are using the skyBirds mod. All NPCs located in the loading location will have visible bleeding effects if they are loaded.
EBT - skyBirds Patch (short).esp - Install this patch if you are using the skyBirds mod. Scripts will be applied at half the distance from the standard loaded area. May improve performance, long range bow attacks will not have bleeding effects.
EBT - skyBirds Patch (mid).esp - Install this patch if you are using the skyBirds mod. NPCs must be in melee range from the player for the bleed to work. Can improve performance, mid to long range bow attacks will not have bleeding effects.

4 texture res and color (optional) - this is a module with blood texture sizes and blood color (there are 9 folders inside the module)

5 blurry screen blood (sorry) - this is the “blur” module
- textures - if you want the blood and blood stains on the screen to be blurry/blurry, then install these textures

6 alt tex (optional) - this is a module for alternative sizes of textures and blood colors (there are 9 folders inside the module), these options only replace large blood splatters, make sure the module you select matches the options you chose when installing module 4 texture res and color, that is, first, for example, from module 4 texture res and color you selected the hi-brigther option, which means then you need to install the same hi-brigther option from this module with the replacement of all files, keep in mind that this is an optional installation, optional
- IMPORTANT!!! Install only 1 of all options!!!
- hi-brigther - high blood textures, blood color is brighter/lighter
- hi-darker - high blood textures, the color of the blood is darker (darker than regular game blood)
- hi-default - high blood textures, normal game blood color
- med-brighter - medium blood textures, blood color is brighter/lighter
- med-darker - average blood textures, the color of the blood is darker (darker than regular game blood)
- med-default - average blood textures, normal game blood color
- low-brighter - low blood textures, the color of the blood is brighter/lighter
- low-darker - low blood textures, the color of the blood is darker (darker than regular game blood)
- low-default - low blood textures, normal game blood color

Requirements:
Skyrim LE 1.9.32.0.8 for mod version 3.8 and higher (via main link)
Skyrim 1.8.151.0.7 for mod version 3.5a (via additional link)
SKSE for game version 1.9.32.0.8
SKSE for game version 1.8.151.0.7
SkyUI 3.4 for game version 1.8.151.0.7
I 4.1/5.1 for game version 1.9.32.0.8
DLC Dragonborn and Dawnguard (optional, patches in archive)

Installation: (can be done via NMM manager or manually)
There are 6 modules in the archive, each module has different options, read the DESCRIPTION of the contents of the archive above
- If you do it manually, do it like this...
1. First of all, go to the 1 core files folder - take all the contents (meshes, Scripts, textures, dD - Enhanced Blood Main.bsa, dD - Enhanced Blood Main.esp) and place everything in the Data folder in the game, confirm merging the folders and files and activate in the launcher
2. Next...go to the 2 patches folder and select the patch that suits you, select only 1 of all 8 patches in accordance with what you have in the game, place the esp. to the Data folder in the game and activate it in the launcher
3. Next...(this is optional), go to the folder 3 optional esp. and select the option that suits you, read the description in this section what these options mean, select the one you need and place the esp. to the Data folder in the game and activate it in the launcher
4. Next...(this is optional), go to folder 4 texture res and color (read the description above), there are 9 options inside, select 1 of the 9 options that you need and place textures in the Data folder in the game, confirm the merge folders and files
5. Next...(this is optional), go to folder 5 blurry screen blood (read the description above), take the textures folder and place it in the Data folder in the game, confirm the merger of folders and files
6. Next...(this is optional), go to folder 6 alt tex (read the description above), you need to select 1 of 9 options that you need and place textures in the Data folder in the game, confirm merging folders and files

How to update a mod from 3.5e1 to 3.8 and higher:
- Just install over the previous version and replace all files, but it’s still better to do this:
1. Go into some room where there are no traces of blood from this mod
2. In the MSM menu, disable the "Delete Mod" mod, exit the menu and wait a while, a notification about the removal of the mod will appear
3. Save to an empty save slot and exit the game
4. Completely delete the mod and all files (disabling esp. in the launcher is not enough, because the mod contains scripts and blood files, so everything needs to be deleted)
5. Load from the last save you made and save again, but in another empty save slot and exit the game
6. Now install the new version 3.6c and play
- Don't forget to delete the dD - Enhanced Blood Main.ini file from the Data folder in the game, this file is no longer needed
- Don't forget to remove patches Dragonborn-EBT Patch.esp, Dawnguard-EBT Patch.esp, Dawnguard-Immersive Creatures EBT Patch.esp, DG-MM-SiC EBT Patch.esp, Dragonborn-MonsterMod EBT Patch.esp, Dawnguard-MonsterMod EBT Patch.esp

Conflicts:
Conflicts with other blood replacers and damage modification mods

Problem:
- The mod remains in the MSM list, but all menu items are gray (unavailable)
Solution:
- Still, you need a second clean save, made with the missing scripts folder. Stopping scripts from the MSM menu alone is not always enough. Those. It’s safer not to overwrite files, but first disable the mod in the MSM menu, save in the game in a clean save slot, exit the game and delete the mod completely, enter the game again and save again, but in another new save slot, and only then install a new one version

Question:
- During the battle from the first person, and in the subsequent transition to the 3rd person, the character’s blood disappears
Answer:
- Take off all your clothes and put them back on

Update:3.8
- Added sounds of blood splashes and drops.
- Added patches for the "skyBird" mod to prevent script binding, in the module 3 optional esps - distance there are three different .esps

3 optional esps (optional) - this is a module with optional esp. files (there are 3 options inside the module)
- IMPORTANT!!! The largerblood or smallerblood options can only be placed on 1 of the 2 options, and the smallerwound option can be placed separately
- largerblood - select this option if you want there to be more blood splashes on the ground (much more than in the original game)
- smallerblood - select this option if you want there to be less blood splashes on the ground (about the same as in the original game)
- smallerwound - select this option if you want there to be fewer bloody wounds on the body (about the same as in the original game)
- distance - option, the distance at which bleeding will appear on NPCs, 2 options dD-Medium Script Range.esp (bleeding will appear on NPCs at a medium distance) and dD-Short Script Range.esp (bleeding will appear on NPCs only at a short distance distances). This can help with performance without creating new blood decals in the distance if you're in close range. By default, in the main mod, blood is visible at long distances. There are also 3 patches for the skyBirds mod
EBT - skyBirds Patch.esp - Install this patch if you are using the skyBirds mod. All NPCs located in the loading location will have visible bleeding effects if they are loaded.
EBT - skyBirds Patch (short).esp - Install this patch if you are using the skyBirds mod. Scripts will be applied at half the distance from the standard loaded area. May improve performance, long range bow attacks will not have bleeding effects.
EBT - skyBirds Patch (mid).esp - Install this patch if you are using the skyBirds mod. NPCs must be in melee range from the player for the bleed to work. Can improve performance, mid to long range bow attacks will not have bleeding effects.

4 texture res and color (optional) - this is a module with blood texture sizes and blood color (there are 9 folders inside the module)

5 blurry screen blood (sorry) - this is the “blur” module
- textures - if you want the blood and blood stains on the screen to be blurry/blurry, then install these textures

Conflicts:
Conflicts with other blood replacers and damage modification mods

Question:
- During the battle from the first person, and in the subsequent transition to the 3rd person, the character’s blood disappears
Answer:
- Take off all your clothes and put them back on