Chlorine tablets Javel solid. Preparation of working solutions "javel solid"

All-Russian Academy of Agricultural Sciences (RAASHN)

State institution All-Russian Research Institute

dairy industry (GU VNIMI)

INSTRUCTIONS

on the use of the disinfectant "Javel Solid" from the company "Jasol" (France) for the disinfection of equipment, inventory, containers and surfaces of industrial premises and the dairy industry

Moscow 1999

UDC 637.132.621.004.55.(083.9)
INSTRUCTIONS

on the use of the disinfectant "Javel Solid"

company "Jazol" (France) for disinfection of equipment, inventory, containers and surfaces of production premises in the dairy industry
The instructions were developed in the equipment sanitary processing sector of the VNIMI State University together with NIID specialists.

The instructions are intended for dairy industry workers when carrying out processes of technological washing and disinfection of equipment, inventory, containers and surfaces of production premises at dairy industry enterprises.

The instructions determine the methods and modes of use of the Javel Solid disinfectant, safety requirements, technological procedures for disinfection, methods for monitoring the concentration of working solutions of the drug and the completeness of rinsing of its residual quantities from the inner surface of disinfected objects.
1.GENERAL INFORMATION

1.1. Disinfectant "Javel Solid" is available in the form of white tablets weighing 3.2 g with a characteristic odor of chlorine, containing sodium salt of dichloroisocyanuric acid (73%) as an active ingredient. The drug is easily soluble in water; When 1 tablet is dissolved in water, 1.5 g of active chlorine is released. At concentrations recommended for use, it completely dissolves to form clear solutions with a pH in the range of 6.0-7.0. Working solutions have a faint odor of chlorine.

Javel Solid is non-flammable, non-explosive, compatible with soaps, sulfonated oils, anionic and cationic surfactants, amphoteric and nonionic substances, alkali metal salts of inorganic and organic acids.

The guaranteed shelf life of the drug "Javel Solid" is 3 years from the date of manufacture in a closed container from the manufacturer in a dry, cool place. The shelf life of working aqueous solutions at room temperature is no more than three days in closed containers.

The drug "Javel Solid" is supplied in hermetically sealed plastic jars of 1 kg, 500 g, 150 g and "blisters" of 50 g.

1.2 Javel Solid is a highly effective antimicrobial disinfectant against coliform bacteria, staphylococci, streptococci, salmonella, yeast and molds.

1.3. According to the parameters of acute toxicity, the product “Javel Solid” according to GOST 12.1.007-76 belongs to the 3rd class of moderately hazardous substances when administered into the stomach (LD50 = 1330 mg/kg). Working concentrations of aqueous solutions (0.0075 - 0.009% active chlorine) can cause dry skin with repeated applications and do not cause irritation to the mucous membranes of the eyes and respiratory organs. The product has a sensitizing effect. Safety requirements are set out in paragraph 3 of this instruction.

1.4. Working solutions of the Javel Solid preparation can be used to disinfect any types of dairy equipment made of stainless, chromium-nickel, low-carbon steel, iron, aluminum, glass enamel, materials coated with nickel and brass, plastic, and also do not cause negative reactions when short-term (7-10 minutes) contacts with rubber, concrete, wood, ceramic tiles, glass and polymer materials.

2. PREPARATION OF WORKING SOLUTIONS

To prepare disinfectant solutions, as well as rinsing, it is necessary to use tap water that meets the requirements of SanPiN 2.1.4.559-96 “Drinking water” and GOST 2874-82 “Drinking water. Hygienic requirements and quality control."

Working solutions of the Javel Solid disinfectant are prepared in the form of working aqueous solutions, the bactericidal concentration of which is set in the range of 0.0075 - 0.009% of active chlorine or 5-6 tablets per 100 liters of water.
Table 1.

Preparation of working solutions of the drug "Javel Solid"

The concentration of the drug "Javel Solid" and the prepared working solutions is determined according to the method described in

3. CONDITIONS OF USE
Disinfectant "Javel Solid" is intended for disinfection of various types of technological equipment, equipment and containers in workshops for the production of milk and dairy products, ice cream, mayonnaise, juices and various drinks. In addition, Javel Solid can be used to disinfect the surfaces of production and utility rooms.

Working solutions of the drug "Javel Solid" are used strictly in accordance with the "Sanitary Rules for Dairy Industry Enterprises" SanPiN 2.3.4.551-96 and the "Instructions for the sanitary treatment of equipment, inventory and containers at dairy industry enterprises" (Moscow, 1998), those. after thorough alkaline washing and rinsing. If necessary, additional acid washing and rinsing is carried out and only then disinfection.

The presence of protein and fatty contaminants on surfaces undergoing disinfection is unacceptable. Immediately after disinfection, rinse with water to remove any remaining disinfectant solution.

Before disinfecting the surfaces of production, sanitary and utility rooms (floors, walls), they must be washed (degreased) with alkaline and, if necessary, acidic technical detergents in accordance with the “Sanitary Rules for Dairy Industry Enterprises”, SanPiN 2.3.4.551-96 , approved by the State Committee for Sanitary and Social Security of the Russian Federation on October 24, 1996 to remove existing protein and fat deposits. The thoroughness of this operation largely determines the subsequent effectiveness of the drug.

After completely removing the remaining cleaning solution with tap water, disinfect the equipment and surfaces of the premises in accordance with the instructions given in Table 2. In this case, the calculated amount of the Javel Solid preparation is added to the tank of the washing station using a mechanized method or to the washing bath using a manual disinfection method. With the mechanized method, it is possible to dilute the working solution of the disinfectant, so it is initially prepared at 0.009% (6 tablets per 100 liters of water); if the solution is diluted to less than 0.0075%, then it is necessary to adjust its “recharge” concentration.
table 2

Disinfection object	Indicators of the working solution "Javel Solid"		Exposure time min.	Conditions and method of use
	Conc., % (according to act. chlorine)	Temperature 0C
1	2	3	4	5
Reservoirs, containers (tanks) - surfaces: external Internal.	0.0075 (manual) 0.0075-0.009 (mechanical) 0.0075 (manual)		7 7	By hand*: application on surface. and immersion with mechanical action using brushes and ruffs. With mechanical: solution recirculation in the system (SIP); exposure depends on the size of the disinfection object and its distance from the washing station.
Pipelines for milk, dairy components, ice cream mixtures, mayonnaise, yoghurts, juices and drinks.	0.0075-0.009 (mechanical) 0.0075 (manual)	40 – 50 40 - 50	7 - 10 7	By hand: soaking (immersion) in a disinfectant solution, washing with brushes. With mechanical: solution recirculation in the system (SIP); exposure depends on the length of the pipeline.
Containers (fermenters, pasteurization tanks, baths for mixtures of milk, ice cream, mayonnaise, VDP, freezers, etc.), bottling lines, filling and packaging machines, packaging machines for liquid paste-shaped milk. products, ice cream and mayonnaise.	0.0075 – 0.009 (mechanical) 0.0075 (manual)	40 – 50 40 - 50	7 - 10 7	By hand*: application on surface. and soaking with mechanical air brushes and ruffs. With mechanical: solution recirculation in the system (SIP); exposure depends on the size of the disinfection object and its distance from the washing station.
Det. equipment, machines and installations (separator plates, taps, couplings, plugs, etc.), fittings and small equipment, transport belts.	0.0075 (manual)	40 - 50	7	Manual*: complete immersion in containers (baths) with disinfectant, mechanical action using brushes and ruffs.
Floors, walls	0,009	40 - 50	At least 10	By hand*: application to surface and fur. air using brushes and ruffs.

- with the manual method of processing, the consumption of the working disinfectant solution is about 0.3 liters per 1 m2 of surface.

For the manual method of disinfection (by immersion) of equipment parts, equipment and containers, stationary and (or) mobile 2-3 section washing baths, tables for spare parts, racks for drying parts and equipment must be provided.

The manual method of disinfection involves repeated (at least 15 times per minute) wiping with brushes and ruffs while immersing the object being treated in a working disinfectant solution or repeated application (at least 10 times per minute) of the working solution on the treated surface of large equipment and wiping with brushes and ruffs, ensuring uniform wetting of the surface and the constant presence of a disinfectant on it. When disinfecting hard-to-reach areas, increase the duration of treatment (exposure time) to 15 minutes.

The sequence of operations associated with the development of technological equipment before disinfection with Javel Solid working solutions is described in detail in the operating instructions for this equipment and in the “Instructions for sanitary processing of equipment, equipment and containers at dairy industry enterprises”, M., 1998.

After disinfection, the concentration of the working solution of the Javel Solid drug is monitored and, if necessary, its norms are adjusted. If there is no protein-fat contamination of the working solution, then it is allowed to use it 4-5 times after bringing the “feeding” concentration to normal.

If there are mechanical impurities or organic substances in the disinfectant working solution used, the disinfectant must be discharged to a neutralization station.

After processing the equipment, pipelines and surfaces of the premises, they are rinsed with running tap water to remove any residual disinfectant on the surface being treated (for 5-7 minutes, depending on the length of the pipelines and the size of the objects being disinfected).

The concentration of active chlorine in Javel Solid working solutions is monitored in accordance with the requirements of the instructions for technical control at dairy industry enterprises. Quality control of disinfection is carried out by microbiological control of production at dairy industry enterprises and sanitary rules and regulations (SanPiN 2.3.4.551-96) “Production of milk and dairy products”.

The disinfectant "Javel Solid2" in concentrations of 0.0075 - 0.009% of active chlorine can be used as an additive to working solutions of detergents used in accordance with the "Instructions for the sanitary treatment of equipment, equipment and containers at dairy industry enterprises."
4. SAFETY REQUIREMENTS
At each dairy enterprise, sanitary processing of equipment and containers is carried out by personnel specially appointed for this purpose: shop cleaners, washers, and operator operators.

Workers are allowed to work if they are at least 18 years old, who have no medical contraindications to this work, who do not suffer from allergic diseases, who have undergone training and instructions on how to safely work with detergents and disinfectants and how to provide first aid in case of accidental poisoning.

When working with No. Javel Solid products, it is necessary to comply with the safety rules formulated in the standard instructions, in accordance with the instructions for washing and preventive disinfection at dairy industry enterprises.

During all work with Javel Solid, it is necessary to protect the skin with rubber gloves (GOST 20010).

The room where they work with Javel Solid must be equipped with steam-exhaust mechanical ventilation.

Javel Solid should be stored separately from food, in a hermetically sealed container from the manufacturer in a dry, dark, cool and covered room in a separately locked cabinet, out of the reach of children.

In the department for preparing disinfectant solutions it is necessary to: post instructions for preparing working solutions and rules for disinfection and washing of equipment; instructions and posters for the safe operation of washing equipment; have your own first aid kit (Appendix 2).

5. FIRST AID MEASURES IN ACCIDENTAL POISONING
5.1.If solutions of Javel Solid get on your skin, wash it off with soap and water.

5.2. If the product gets into your eyes, rinse them under running water.

5.3. If the product gets into the stomach, give the victim a few glasses of water, then give 10-20 tablets of activated carbon.

5.4. If precautionary measures are violated, irritation of the respiratory organs and mucous membranes of the eyes may occur (stingling in the nose, cough, suffocation, lacrimation, pain in the eyes), the victim must be taken to a separate, clean, ventilated room or into fresh air, rinsed out the mouth, and given warm milk to drink. baking soda (1 teaspoon per glass of milk).

6. DETERMINATION OF THE MASS FRACTION (CONCENTRATION) OF ACTIVE CHLORINE IN JAVEL SOLID WORKING SOLUTIONS

Determination of the concentration of active chlorine in Javel Solid working solutions is carried out by iodometric titration.

Reagents and equipment:

Potassium iodide according to GOST 4232-74, crystalline, not containing free iodine, 10% solution.

Sulfuric acid according to GOST 4204-77, 25% solution.

Sodium thiosulfate according to GOST 27068-86, 0.1 N. solution.

Soluble starch according to GOST 10163-76, 1.0% solution.

Potassium dichromate (K2Cr2O7), analytical grade.

25 ml burette with 0.1 ml graduations.

Pipette 2-2-10 and 2-2-5 according to GOST 20294-74.

Conical or round flat-bottomed flasks according to GOST 25336-82 type P-2 or type Ki-2 with a capacity of 100 ml and 250 ml.

Determination progress:

Pipette (2-2-10) 10 ml of the analyzed disinfectant solution into a 250 ml flask. Add 10 ml of a 10% solution of potassium iodide and 1.5 ml of 25% sulfuric acid. The solution is left for 10-12 minutes. Place in a dark place, after which the released iodine is titrated with 0.1 N. a solution of sodium thiosulfate Na2S2O3 using 1 ml of 0.5% starch solution as an indicator. The starch solution is added before the end of the titration, after the titrated solution turns straw-yellow. Then continue titration with sodium thiosulfate solution until the blue color disappears.

The mass fraction (concentration) of active chlorine (X) of active chlorine (X) is calculated using the formula:

Х=(0.00355хVxKx100)/m, where

X - mass fraction (concentration) in%;

0.00355 – mass of active chlorine, corresponding to 1 cm3 0.1 N. sodium thiosulfate solution, g;

V – volume 0.1 N. sodium thiosulfate solution used for titration, ml;

K* – correction factor to 0.1 n. sodium thiosulfate solution;

m – mass of the analyzed sample, g, equal to 10.0 g.

The correction factor when preparing solutions of sodium thiosulfate from fixanal is 1. In the absence of fixanal, it is necessary to use sodium thiosulfate of chemically pure grades. or ch.d.a. The calculation of “K” is carried out according to the general rules when determining the correction factor, described in the “Guide to the preparation of titrated solutions (V.M. Suslennikova, E.T. Kiseleva. Ed. 6th, revised, Moscow, Chemistry, 1982) .

Setting the correction factor to titre 0.1 and sodium thiosulfate solution.

A weighed portion of potassium dichromate. Dried to a constant weight in an amount of 0.15-0.2 g, dissolve in 50 ml of water, add 2 g of potassium iodide and 8 ml of concentrated hydrochloric acid or 10 ml of sulfuric acid. The solution is stirred, brought to 400 ml and the released iodine is titrated with 0.1 N sodium thiosulfate solution until the color changes from brown to yellow-green. Add 1.5–2.0 ml of starch solution and continue titrating until the color changes from blue to emerald green.

At the same time, a control titration is carried out, for which 1 g of potassium iodide, 8 ml of concentrated hydrochloric acid HCl or 10 ml of concentrated sulfuric acid H2SO4 are added to 50 ml of distilled water, adjusted to 400 ml with water, 1.5-2.0 ml of krasmfal solution are added and titrate with sodium thiosulfate as described above.

The correction factor K is calculated using the formula:

K= a/ (V1-V2)x0.0049035, where

a – sample of potassium dichromate (v.g.).

V1 – volume of 0.1 N sodium thiosulfate solution used for sample titration, ml.

V2 – volume of 0.1 N sodium thiosphosphate solution used for control titration, in ml.

0.0049035 – conversion factor.

Note.

To convert the mass fraction (%) of active chlorine into mass concentration (mg.act.Cl/l), the calculation data must be multiplied by 10000.

7. RECOMMENDED CONTENTS OF A FIRST KIT

Remedies for acid victims:

Sodium bicarbonate (baking soda) in powder or solution;

Ammonia.

Remedies for victims of alkalis:

Citric acid (powder or solution);

Boric acid.

Remedies for burns:

Syntomycin emulsion;

Sterile bandage;

Sterile cotton wool;

White streptocid.

Other medical aids:

30% sodium sulfacyl solution;

Salol with belladonna;

Validol;

Analgin;

Zelenin drops or valerian drops;

Potassium permanganate;

Hydrogen peroxide;

Antihistamines (suprastin, diphenhydramine, etc.);

Activated carbon.

Tool:

Putty knife;

Glass rod;

Pipette;

Measures aimed at disinfecting environmental objects make it possible to get rid of dangerous microorganisms. To do this, you should use special tools. Instructions for use of “Javel Solid” contain information about the range of effects of the product and methods of its use. Let's take a closer look at this information.

Description of the product

Currently, pathogenic microorganisms multiply and spread in the environment at tremendous speed. It is simply impossible to prevent infection without observing safety measures. It is recommended to use special-purpose disinfectants to treat surfaces. Instructions for use "Javel Solid" belongs to this category of products.

It is impossible to do without disinfection in hospitals and beauty salons. It is necessary to treat not only the work surface and tools, but also your hands. In medical offices, containers used for storing masks and used materials must be processed.

Indications for use

Instructions for use Javel Solid is positioned as a universal disinfectant. The product in tablet form is used in the following cases:

• general cleaning of premises;
• disinfection of cosmetic and medical instruments;
• processing of instruments and equipment;
• cleaning vehicles for transporting patients;
• disinfection of dishes.

"Javel Solid": instructions for use in dentistry

Dentists know better than anyone how important it is to treat the instruments and devices used in the dental treatment process. After all, every person’s oral cavity contains a huge number of both harmful and beneficial bacteria.

To treat surfaces and tools with a disinfectant based on the sodium salt of dichloroisocyanuric acid, you need to dissolve the tablet in water. The instruments are processed for 15 minutes. Instructions for use of Javel Solid recommend using 100 ml of the prepared solution per square meter.

Disinfection regimes for various objects using Javel Solid (except tuberculosis)

Disinfection objects	Viral infections		Bacterial infections		Disinfection method
		Decontamination time, minutes	Concentration of active chlorine	Decontamination time, minutes
Products made of corrosion-resistant metals, glass, rubber, plastics					Dive
Patient care items made of glass, plastics, rubber *					Dive
Dishes without food residues					Dive
Dishes with leftover food					Dive
Linen soiled with secretions					Soak
Linen soiled with blood					Soak
Linen not contaminated with secretions					Soak
					Immersion or rubbing
Indoor surfaces, hard					Wiping or irrigation
Sanitary equipment *					Double Rubbing
Cleaning equipment					Soak

* Disinfection can be carried out with the addition of 0.5% detergent.

** Disinfection of room surfaces for intestinal infections can be carried out with solutions containing 0.015% active chlorine / 1 table. for 10 liters of water/.

Precautionary measures:

The product "Javel Solid" has a mild irritating effect on the skin, mucous membranes of the eyes and respiratory organs.

DEOCHLOR TABLETS /company P.F.C., France/:

A jar weighing 1 kg / the size of a 1 liter jar / contains 300 tablets, which corresponds to 2 bags of chloramine. Shelf life 3 years, no odor, not afraid of accidental flooding, frost-resistant. Does not damage the processed products, does not have a corrosive effect.

A universal product for general disinfection. For disinfection of surfaces by wiping - 1 table. for 10 liters of water. For disinfection of medical instruments 4 tables. for 10 l. water /exposure 60 min./. From 1 jar you can prepare 750 liters of solution.

CHLORSEPT /Megentech, Ireland/:

It has bactericidal / including tuberculocidal /, virucidal and fungicidal activity. Has a slight irritant effect on the skin and mucous membranes. Has a corrosive effect on metal products. For disinfection, a 0.3% solution is used for tuberculosis, 0.2% for candidiasis, and a 0.1% solution for bacteria and viruses. Exposure time 60 minutes.

SEPTABIC /Abik company, Israel/:

It has a broad microbicidal effect, but is not active against tuberculosis.

"Javel Absolut" is a tableted chlorine product produced by domestic manufacturers. It comes in the form of white, quick-dissolving tablets. The main active ingredient is the sodium salt of dichloroisocyanuric acid in a volume of no more than 84%; the composition also contains additional elements that improve the rapid dissolution of the drug in water.

The weight of one tablet is 350 mg, and when dissolved in the working fluid, active chlorine is released in the amount of 150 mg. The disinfectant "Javel Absolut" has a strong antimicrobial effect. It is used to combat bacteria of gram-negative and gram-positive organisms (including tuberculosis), viruses (poliomyelitis, HIV, hepatitis, strains of avian influenza, SARS, adenovirus and others), fungi such as Candida and dermatophytes, especially dangerous infections such as plague , cholera, tularemia, anthrax in spore form, as well as various anaerobic infections.

Purpose

A unique domestic preparation, Javel Absolut, is used as a highly effective disinfectant. Instructions for use contain all the necessary information for a specific product. Thus, the drug can be used for prevention and elimination of possible foci of infection as a disinfectant solution.

Application area

It is used in honey. institutions such as:

• clinics;
• hospitals;
• sanatorium and rehabilitation centers;
• day care hospitals;
• medical centers and medical units;
• specialized homes for the elderly and disabled;
• maternity wards (excluding neonatology);
• dental clinics;
• dispensaries;
• transplantation centers;
• blood transfusion stations;
• disease diagnostic centers.

And also "Javel Absolut", the instructions of which contain recommendations to use the drug if necessary, are successfully used:

• on transport transporting patients;
• in children's institutions;
• in public utility organizations (for example, in hotels, saunas, hostels, hairdressers, beauty salons, laundries, industrial markets, catering, public toilets);
• in educational institutions;
• in cultural and sports organizations, for example, in swimming pools, sports schools, sports complexes, cinemas, etc.;
• at social welfare centers.

The drug "Javel Absolut" is used to eliminate possible foci of infection with tuberculosis bacteria, nosocomial infections, and anaerobic organisms. Instructions for use in schools indicate that disinfection should be carried out as a final step. It will prevent children from becoming infected with viral infections: polio, HIV, hepatitis, bird flu, SARS, and fungal diseases.

Disinfection methods

"Javel Absolut", the instructions for use of which contain information about existing ones, are used for processing various objects and surfaces. So, it is used for:

• disinfection treatment of various surfaces in premises, as well as pieces of cabinet furniture, the outer surface of various household appliances and apparatus, sanitary equipment, as well as fabrics, linen, appliances, dishes, including laboratory items, sanitary cleaning material, children's toys, general plastic products use, rubber coverings and items;
• disinfection of medical items made of corrosion-resistant materials (rubber, plastic, glass);
• processing of origin (dressing materials, bed linen, including disposable ones, protective clothing for medical workers and other items) before disposing of them;
• disinfection of special equipment and tools used in hairdressing salons, beauty salons, clubs and other institutions serving the public;
• disinfection of vehicles for transporting passengers, food products and industrial goods.

This is an approximate list of areas of application for Javel Absolut. The instructions for use contain information that must be read before use.

Compound

Potent components provide high performance properties of the Javel Absolut 300 disinfectant. Instructions for use contain information on the composition of the drug:

• sodium salt of dichloroisocyanuric acid (up to 84%);
• sodium carbonate;
• bicarbonate of soda.

Toxicity classification

According to the toxicity classification according to GOST 12.1.007-76, Javel Absolut is also classified as dangerous. The instructions for use contain information on the main parameters. Thus, the products belong to the 3rd class for moderate hazard when entering the gastrointestinal tract, the 4th class of toxicity for skin damage, and the 2nd class for toxic volatility (vapors). According to Professor Sidorov's classification, the drug is low-toxic when administered parenterally, acts as a local skin irritant, has a pronounced effect on the mucous membranes of the eyes and does not have a sensitizing effect.

Solutions containing a small amount of a toxic component (0.015-0.06%), when applied to the skin surface once, do not have a harmful effect on the integument, may lead to slight peeling and dryness, and when exposed to the mucous membrane of the eyes, minor irritation. Vapors from a working solution with a component content of 0.015% by weight belong to the 4th class of low-toxic drugs, with a volume of 0.03-0.06% there is a 3rd class of toxicity, 0.01-0.025% - to the 2nd class dangerous active substances.

How to prepare the solution

To prepare the solution, you must prepare an enamel, undamaged glass or plastic container. The required amount of the tablet is dissolved in it in drinking water at room temperature (18-22 degrees). The working solution has a shelf life of three days, after which it must be disposed of and a new one prepared if necessary.

Precautionary measures

Any chemical disinfectant has a number of features for use. Detailed information can be found on the packaging of Javel Absolut. Instructions for use, consumer reviews and advice from disinfectants can also help when using the drug. In any case, you must follow the safety recommendations:

1. Do not use the product for people with a tendency to allergic reactions and chronic diseases of the respiratory system.
2. When using the drug, wear protective gloves.
3. The preparation of the working solution must be carried out in a closed container.
4. The rooms in which the disinfection process is carried out must be well ventilated, and the containers in which materials are soaked must be sealed.
5. Cleaning of medical materials and products from disinfectant must be carried out under running water (glass, metal - 3 minutes, rubber and plastic - 5 minutes).
6. At the end of the disinfection process, it is recommended to ventilate the room until the smell of chlorine is completely eliminated.
7. Do not allow the working composition and undissolved tablets of the drug to come into contact with the skin and mucous membranes. If contact occurs, rinse with running water for 3-5 minutes.
8. It is prohibited to drink alcohol, smoke, or eat food during treatment. After finishing working with the disinfectant, you must wash your hands thoroughly with soap.

Conclusion

"Javel Absolut" is a highly effective drug for disinfecting premises and objects for various purposes. According to reviews, the product has the expected effect and has good performance in eliminating possible residual effects.

Description

Compound:
containing the sodium salt of dichloroisocyanuric acid as an active ingredient. When 1 tablet is dissolved in water, 1.5 g of active chlorine is released.

Best before date:
The shelf life of the product is 3 years. The shelf life of working solutions is 3 days.

Microbiology:
The product "JAVEL SOLID" has an antimicrobial effect against bacteria (including Mycobacterium tuberculosis), viruses (including hepatitis and HIV viruses), fungi of the genus Candida, and dermatophytes.

Toxicity:
According to the parameters of acute toxicity when administered into the stomach, the product "JAVEL SOLID" belongs to the 3rd class of moderately hazardous substances according to GOST 12.1.007-76. Has a slight irritating effect on the skin, mucous membranes of the eyes and respiratory organs.

Purpose:
it is applied for:
Solutions of the "JAVEL SOLID" product are intended for disinfection of indoor surfaces, furnishings, including during general cleaning, sanitary transport, and vehicles for transportation.

Packing:
Available in plastic jars with a safe lid, 150 and 300 tablets each

Storage and transportation:
the product is transported by all modes of transport available on the territory of the Russian Federation, in accordance with the rules for the transportation of goods in force for this type of transport, guaranteeing the safety of products and containers.
The product must be stored separately from medications in covered, ventilated areas in a dry and clean place, at a sufficient distance from heat sources and open flames, in places inaccessible to animals and unauthorized persons.

INSTRUCTIONS

on the use and methods of quality control of disinfectants

"JAVEL SOLID"JAZOL company (France)

Guidelines were developed by the Research Institute of Disinfectology of the Russian Ministry of Health

Instructions for use are intended for personnel of medical and preventive institutions, workers of disinfection enterprises and other institutions that have the right to engage in disinfection activities.

1. GENERAL PROVISIONS

1.1. The product “JAVEL SOLID” is produced in the form of tablets weighing 3.2 g, containing the sodium salt of dichloroisocyanuric acid as the active ingredient. When 1 tablet is dissolved in water, 1.5 g of active chlorine is released. The shelf life of the product is 3 years.

1.2. The product "JAVEL SOLID" is highly soluble in water. Aqueous solutions are transparent and have a slight chlorine odor. The shelf life of working solutions is 3 days.

1.3. The product "JAVEL SOLID" has an antimicrobial effect against bacteria (including Mycobacterium tuberculosis), viruses (including hepatitis and HIV viruses), fungi of the genus Candida, and dermatophytes.

1.4. According to the parameters of acute toxicity when administered into the stomach, the product "JAVEL SOLID" belongs to the 3rd class of moderately hazardous substances according to GOST 12.1.007-76. Has a slight irritating effect on the skin, mucous membranes of the eyes and respiratory organs.

1.5. Solutions of the "JAVEL SOLID" product are intended for disinfection of indoor surfaces, furnishings, including during general cleaning, sanitary transport, and vehicles for transportation.

food products, linen, tableware and laboratory utensils, patient care items, medical products, sanitary equipment, cleaning equipment for bacterial (including tuberculosis), viral (including hepatitis and HIV infection) and fungal (candidiasis, dermatophytosis) infections etiology in health care facilities, at communal facilities (hotels, hostels, baths, laundries, swimming pools, hairdressers, etc.), catering and food trade establishments, during preventive, current and final disinfection in children's institutions.

2. PREPARATION OF WORKING SOLUTIONS

Working solutions are prepared in enamel, glass or plastic containers by dissolving Javel Solid tablets in water (Table 1).

Table 1.

Preparation of working solutions

3. APPLICATION OF “JAVEL SOLID”

3.1. Solutions of Javel Solid are used for disinfection of medical devices, including single-use products (before disposal)